How much oil is in the Mazda CX 5 engine

The new generation Mazda CX 5 is more reminiscent of the CX 9 crossover. Externally, the car is similar to previous models, but with great prospects. If we talk about the power unit, then the motors of the SKYACTIVE-G series can be called a new product that the Russian market has just begun to develop. In its class, the Mazda CX 5 is the best due to its minimal weight, excellent aerodynamics, environmental friendliness and efficiency. But even for the most modern gasoline engine, it is important to choose the right oil, since the life of the main component of the car depends on this. For owners of the Mazda CX 5, changing the oil should come first, since highly accelerated engines place increased demands on lubricants. According to the manual, the viscosity of the composition used should be 0W-20 and 5W-30.

If we consider gasoline engines, the tolerances differ depending on the specific model of the power unit.

For example, for gasoline engines, oil for Mazda CX 5 must meet API SL/SM/SN, ACEA A3/A5, SAE 0W-20 tolerance standards with a lubricant volume of 4.2 liters. This applies to power units for 2.0 PE-VPS (150 - 165 hp), 2.5 PY-VPS (192 - 230 hp).

If the car is equipped with a 2.2 SH-VPTS diesel engine (150 hp), then the oil volume will be 5.8 liters, with API CF, ACEA B3, SAE 5W-30 approvals.

Original Mazda CX 5 motor oil

Several original compounds are used for this car.

Original oil

For diesel models, Original Oil Supra DPF 5W-30 was created (art. 830077989). This is another synthetic composition.

Of course, if you choose original type engine oil for the Mazda CX 5, it will be better for the power unit. But sometimes the right brand of lubricant is not available or is too expensive.

Unoriginal little

If you consider the Mazda CX 5, which oil to fill in the car, then you can choose analogues recommended by the manufacturer.

Approved analogues by tolerance

Oil volume for replacement

Knowing what kind of oil to pour into the Mazda CX 5, all that remains is to decide on the container volume. Of course, the more the merrier. But if you can’t buy in reserve (and some dealers don’t recommend doing so at all), then it all depends on the engine size. By volume:

• Skyactiv-G 2.0 engines will require 4.2 liters of lubricant.
• If the power unit is 2.5 liters, then you should always have 4.5 liters of oil.
• The 2.2 Sky Diesel power units are considered the most voracious. To completely replace the fluid, you will need 5-5.1 liters of lubricant.

Oil consumption in the Mazda CX5 engine

Driving style, mileage and other factors need to be taken into account. For example, some add original engine oil for Mazda CX 5 every 7.5 thousand km for 2.5 liter engines. And others start replacing only after 8 thousand.

km, subject to a speed of 110-120 km/h. Some car owners top up with 150 ml for every 3 thousand km, while others do not top up anything for the first 15 thousand km. If you go by the reviews of car owners, then on average a replacement is performed every 7.5 thousand.

km, subject to the use of 0W20 formulations.

How to check the oil level in a Mazda CX5

It is extremely easy for the owner of a Mazda CX 5 to determine the oil volume. To do this you need to follow several steps:

1. Place the machine on a level surface.
2. Warm up the engine to standard temperature (operating).
3. Turn off the engine for 5 minutes.
4. Pull out the oil dipstick, wipe it and put it back.
5. Pull out the dipstick and determine the oil level.

If the engine is gasoline, then the normal level is between marks F and L. For a diesel engine, the lubricant composition should be between X and L.

Replacing Mazda CX-5 engine oil

This procedure also does not require special knowledge. To change the oil you need:

1. Warm up the engine for 5 minutes. After this, it is better to drive the car into the inspection hole.
2. Unscrew the filler plug and pull out the dipstick.
3. Draining the old is not enough. You need to prepare a container of 5 liters or more.
4. Unscrew the drain plug.
5. Flush the engine (optional).
6. Change the oil filter.
7. Fill with new oil.

The frequency of changing the lubricant depends on the frequency of operation of the car. As a rule, a mandatory and complete oil change is carried out after 15 thousand km. But, if the car owner drives less than 15 thousand km per year, then the change simply needs to be done annually.

HOW MUCH OIL IS REQUIRED FOR A PARTICULAR ENGINE

First generation Mazda CX – 5 CE (2012 – 2021)

The first-generation compact crossover came with permanent front-wheel drive and rear-wheel drive connected via an electromagnetic clutch. Economical fuel consumption, a spacious interior, high-quality exterior materials and worthy innovative technical solutions SkyActiv, which include a new engine, gearbox, and special body structure, instantly conquered the Russian market and brought the CX-5 to the leading position in terms of sales. In 2014, the restyling of the model updated the infotainment system, added a sports mode, and an electronic parking brake. Externally, the radiator grille, side mirrors and rims have been transformed, and sound insulation has improved.

First generation engines (2012 – 2021)

Gasoline engines

• 2.0 PE-VPS (150 hp) - oil volume 4.2 liters; approvals API SL/SM/SN, ACEA A3/A5, SAE 0W-20
• 2.0 PE-VPS (160/165 hp) - oil volume 4.2 liters; approvals API SL/SM/SN, ACEA A3/A5, SAE 0W-20
• 2.5 PY-VPS (192 hp) - oil volume 4.5; approvals API SL/SM/SN, ACEA A3/A5, SAE 0W-20 (2013-2017)

Diesel engines

• 2.2 SH-VPTS (150 hp) - oil volume 5.8; approvals API CF, ACEA B3, SAE 5W-30
• 2.2 SH-SHY1 (175 hp) - oil volume 5.8; approvals API CF, ACEA B3, SAE 5W-30

Second generation Mazda CX – 5 KF (2017 – present)

The modernization of the second generation of the model modified the body, which in addition became more rigid. The suspension has been improved, achieving a softer ride. The manufacturer has again worked on sound insulation and added a new security system. Driving characteristics have improved: cornering, handling. The body became shorter by 1 cm, the ground clearance increased by the same length, and the trunk volume increased. The updated list of options began to bring the Mazda CX-5 closer to a premium car. Gasoline engines remained the same, but a modification of the diesel engine with 175 hp. no longer available.

Also read: Engine oil for Mazda 3 BM engine

Second generation engines (2017 – present)

Gasoline engines

• 2.0 PE-VPS (150 – 165 hp) - oil volume 4.2 liters; approvals API SL/SM/SN, ACEA A3/A5, SAE 0W-20
• 2.0 PE-VPS (150 – 165 hp) - oil volume 4.2 liters; approvals API SL/SM/SN, ACEA A3/A5, SAE 0W-20
• 2.5 PY-VPS (192 hp) - oil volume 4.5; approvals API SL/SM/SN, ACEA A3/A5, SAE 0W-20
• 2.5 PY-VPTS (230 hp) – oil volume 4.5; approvals API SL/SM/SN, ACEA A3/A5, SAE 0W-20

Diesel engine

• 2.2 SH-VPTS (150 hp) - oil volume 5.8; approvals API CF, ACEA B3, SAE 5W-30

Oil for Mazda CX-5: which is better?

Motor oil is necessary for the normal operation of a car engine. It is designed to lubricate rubbing parts, cool them, clean them and protect them from corrosion. Therefore, we recommend approaching the issue of choosing engine oil with full responsibility. Compare what oil you poured before reading this article and which one you chose.

Modern highly accelerated Mazda CX-5 engines are very demanding on the quality of lubricants. In the instruction manual, the manufacturer recommends oil for the Mazda CX-5 with a viscosity of 0w-20 and 5w-30.

• So, what is the best oil for Mazda CX-5?
• Branded or analogues from other manufacturers?
• Little viscous or not?
• Let's find out!

Options

The Mazda CX-5 family of cars is supplied to Russia with engines from the SKYACTIV-G line, producing 150 hp. and 192 hp For long-lasting and trouble-free operation of engines, it is good to use motor oil that matches their design and operating conditions.

How much oil to use and what kind to use can be found in the owner's manual.

Engine oil volume is 4.2-4.5 liters.

Dealership centers pour original oil for the Mazda CX-5 during regular routine maintenance - Mazda Supra 0W-20 and Ultra 5W-30. Here you can only select the oil viscosity.

1. Supra 0W-20 is low-viscosity, energy-saving. It is this that will ensure the efficiency and dynamic qualities promised by the plant.
2. Ultra 5W-30 is a thicker oil designed for unfavorable operating conditions. The service book specifies normal and unfavorable operating conditions (the service interval is halved).

For cars under warranty, this is the best option.

For those whose warranty period has expired, or those who prefer to maintain their car themselves, they will be faced with a wider choice. In this case, you should also follow the manufacturer’s recommendations and use 0W-20 and 5W-30 from other oil companies:

• Idemitsu Zepro Eco-Medalist
• Mobil1 AFE
• Pennzoil Platinum
• Quaker State U.D.
• Motul Eco-Lite

However, there are other viscosities that can be used for your vehicle, such as 0W-30 or 5W-20 that meet API specifications and Mazda tolerances.

Independent choice allows you to save money, but also carries a certain risk. After all, only a high-quality product will provide you with flawless engine operation for a long time.

How to choose engine oil for Mazda CX 5

The latest technologies in engine production by the Japanese concern Mazda have made it possible to create a unique line of Skyactiv engines.

Compared to a series of previous engines, this model has several breakthrough directions.

Of course, a new engine requires appropriate lubricants; which engine oil is best suited for the Mazda CX 5 will be discussed further.

The Mazda CX 5 car manufacturer, like all official dealers, fills in standard engine oil with an average kinetic viscosity of 5W30. However, it can be successfully replaced with a Toyota analogue; their viscosity is approximately the same.

In order to understand which oil for skydrive is better, it is worth turning to the experience of car owners who have used various lubricants for their car’s engine.

Factory lubricant for skyactiv 5W30

Some car enthusiasts claim that if, after running-in, you continue to fill the Mazda CX 5 with the oil specified by the manufacturer, you can in some cases observe an increase in its level, which will be accompanied by a gasoline smell. The lubricant level can rise up to 10 mm above the top mark of the dipstick.

Although the dealer does not recommend changing the Mazda Ultra 5W30 lubricant to another, a wide response on car enthusiast forums highlighted this problem. After the scheduled oil change has taken place, and the lubricant level in the engine also increases, the service center offers to drain the lubricant from the SkyActiv engine to a level just below the upper mark of the dipstick.

Continuing operation, you can notice that the lubricant begins to disappear, this indicates that the oil is burning out from the Mazda CX 5 engine. Presumably the reason for this is the dilution of the oil with gasoline, which leads to evaporation at high temperatures in a running SkyActive engine.

Idemitsu Zepro 0W20 for Mazda CX 5

This lubricant does its job well, although it does it better when driving on the highway. It is also prone to liquefaction during operation of the skyactive engine.

But the use of this lubricant did not lead to burnout, this is explained by the fact that the liquefaction was proportional to the mass of the evaporating material.

Among the disadvantages, it can be noted that this lubricant does not work long enough on a weak base.

Pennzoil Ultra 5W30 oil

This lubricant is characterized by higher kinetic viscosity compared to the first two samples; it is manufactured on the basis of GTL technologies. During testing, it was noticed that when filling the Mazda CX 5 with high-octane A-98 gasoline, oil burnout increased, and as soon as fuel with a lower octane number A-95 was used, everything returned to acceptable limits.

Based on the results of drop tests, it can be noted that Pennzoil Ultra 5W30 oil copes with its task perfectly and prevents evaporation well throughout the entire declared service life.

Over the entire period of use, the lubricant level in the Mazda CX 5 SkyActive engine decreased by only 5 mm, from the lowest point on the dipstick. This is considered a completely acceptable result, especially if you take into account that the oil was not added while driving.

Advice! For SkyActive engines in the Mazda CX 5, this lubricant is almost ideal, at least the price-quality ratio is at the highest level.

The average burnout level was 700 ml per 8000 km. A study through drop testing confirmed the reliability of the lubricant for the Mazda CX 5 engine.

The low degree of “wetting” indicates that this lubricant reliably maintains the declared kinetic viscosity indicators.

Although, due to the fact that the alkaline number of this sample is comparable to that of previous samples, oil burnout was also observed.

Amsoil SS 5W30 lubricant

Based on the results obtained, it was advisable to test engine oil for Mazda CX 5 SkyActive with similar kinetic viscosity characteristics, but with a higher base number.

In winter, it maintains its viscosity well, which is not surprising. After 4000 km, the level of lubricant in the skyactive engine decreased slightly; the total decrease was 3 mm at the dipstick level.

In summer, the oil retained its viscosity and burned slightly less than the previous sample, but the differences were insignificant.

In general, it should be noted that viscous lubricants made using GTL technology are well suited for SkyActiv engines installed on the Mazda CX 5. Although oils with lower kinetic viscosity, which are filled in during warranty maintenance services, can reduce fuel consumption in winter.

How important is viscosity for skyactive engines?

Many owners of the Mazda CX 5 believe that only lubricant with a viscosity of 0W20 is suitable for their car, although in fact, no precise instructions in this regard were found in the operating instructions.

Most likely, this is due to the fact that in Western Europe and the USA, there is judicial practice, as a result of which car manufacturers are often held liable for inaccuracies.

Initially, the engine is developed, and only then the most suitable type of lubricant is selected for it, and not vice versa.

According to the manual, it is recommended to use lubricant exclusively with a viscosity of 0W20, but in the service table it is recommended to change the oil after a mileage of 8000 km.

This can only indicate that the manufacturer is playing it safe and is not confident in the reliability of oil with such a viscosity.

European countries even write in the operating instructions that it is quite acceptable to replace 0W20 lubricant for Mazda CX 5 engines with a more viscous 5W30. It can withstand 12 months without replacement and run 20 thousand km.

The Japanese indicate in the manual as many as three types of lubricants; their replacement requires 15 thousand km of mileage in any conditions, among them oils:

From this we can conclude that all these types of lubricants can be used in our conditions; their use in skyactive engines is completely justified.

Amsoil SS 5W30 lubricant

Based on the results obtained, it was advisable to test engine oil for Mazda CX 5 SkyActive with similar kinetic viscosity characteristics, but with a higher base number.

In winter, it maintains its viscosity well, which is not surprising. After 4000 km, the level of lubricant in the skyactive engine decreased slightly; the total decrease was 3 mm at the dipstick level.

In summer, the oil retained its viscosity and burned slightly less than the previous sample, but the differences were insignificant.

In general, it should be noted that viscous lubricants made using GTL technology are well suited for SkyActiv engines installed on the Mazda CX 5. Although oils with lower kinetic viscosity, which are filled in during warranty maintenance services, can reduce fuel consumption in winter.

How to choose the right engine oil for Mazda CX-5

Experienced car owners know how important the correct choice of fuels and lubricants is. High-quality oil will provide reliable engine protection from premature wear and prolong its performance.

Currently, the manufacturer offers a huge range of machine oils for any budget. There are cheap options and more expensive premium products available in the market. Today we will talk about motor oil for the Mazda CX-5, study the disadvantages and advantages, find out which brands are recommended to choose, and what experienced car owners advise.

Types of oils, advantages and disadvantages

Choosing engine oil is not a complicated process; the main thing is to take into account the characteristics of the engine and operating temperature conditions. To understand which oil is best for the Mazda CX-5, you need to highlight the advantages and disadvantages of each type.

Type of oilAdvantagesDisadvantages

If you do not know what kind of oil to fill in the Mazda CX-5, it is better to trust the specialists or read the information in the manual.

How to make the right choice

The unique Skyactiv technology requires the use of high quality fuels and lubricants. In order not to make a mistake with your choice and understand exactly what kind of oil to pour into the Mazda CX-5, you need to refer to the technical documentation for the car.

Most often, 0W-20 and 5W-30 brands are poured into the crossover engine, since they are most suitable for the SKYACTIV power plant and are compatible with all driving modes.

The use of analog fuels and lubricants is also allowed, but the manufacturer declines responsibility for the performance of the power plant and all main components.

Before you decide which oil to fill in the Mazda CX-5, you should pay attention to the markings. The label indicates:

This indicator informs about the degree of wear resistance of the power unit and the level of friction. SAE is divided into 3 subclasses - winter, summer and all-season.

For Japanese, Korean and American automobile brands, the API SN specification is recommended.

When purchasing a product, it is important to look at the production date so as not to buy products with the right dates. Under normal conditions, fuels and lubricants are stored without loss of their properties for up to 3 years.

• Brand, country of production.

Recommendations from the manufacturer

The manufacturer recommends filling Mazda CX-5 only with original engine oil. According to the manual, it is necessary to choose SL or SM brands (API classification). It is also allowed to use type A3/A5 (according to ACEA standards).

The choice of fuels and lubricants should be made taking into account temperature and climatic operating conditions:

• 5W-30 - temperature range from 300C to + 380C;
• 10W-40 - from 280C to + 400C;
• 0W-30 - from 350C to + 380C.

As an alternative to Mazda Original Oil Ultra, 5W-20 can be used. Dealers often fill Mazda CX-5 with 0w20 oil.

We suggest that you familiarize yourself with the recommended brands of engine oil for the Mazda CX-5 Skyactive, depending on the year of manufacture of the model and the season of operation.

Year of manufactureWinterSummerType of fuel and lubricants

People's rating or TOP 10 most popular engine oils

There is huge competition between domestic and foreign brands in the automobile oil market. In the technical documentation, the manufacturer informs about which oil is most suitable for the Mazda CX-5 engine. Recommended brands include 5W30.

Taking into account reviews from car owners, we were able to compile the TOP 10 most popular lubricants and highlight the advantages and disadvantages of each:

1. Idemitsu Zepro Touring 5W-30 Synthetic oil capable of operating at any temperature. Minus - intended only for gasoline engines.
2. Lukoil Genesis Claritech 5W-30 All-season oil that can increase the performance of the power unit. Fakes are rare. Disadvantages include the need for frequent replacement.
3. General Motors Dexos2 Longlife 5W30 Synthetic oil with high performance at an affordable price. Does not lose properties at low temperatures, behaves well with an aggressive driving style. The downside is that it gets old quickly.
4. SHELL Helix HX8 Synthetic 5W-30 Suitable for gasoline and diesel engines. Protects and cleans the main components of the power unit, prevents the appearance of harmful deposits on the surface of the engine. Counterfeits are often found on store shelves.
5. ZIC XQ LS 5W-30 The reduced content of ash, sulfur and phosphorus in the composition allows you to protect engine elements from rapid wear, while increasing fuel efficiency. The disadvantage is selectivity in the quality of gasoline.
6. TOTAL Quartz INEO ECS 5W30 Low sulfate ash content allows exhaust gases to be better purified, increasing efficiency.
7. MOBIL 1 ESP Formula 5W-30 is produced using a special technology that cleans all elements of the power unit, extending their durability. The disadvantage is the high cost.
8. Castrol Edge 5W-30 Forms a strong oil film, increases engine performance, making acceleration dynamic and smooth.
9. LIQUI MOLY Special Tec AA 5W-30 Provides engine wear protection and is consumed economically. Designed specifically for American and Asian automotive brands.
10. Motul Specific dexos2 5W30 Suitable for all engines, recommended for crossovers and SUVs. High quality oil, economical and environmentally friendly. The downside is the high cost.

Functions and types of oils

The range of motor oils on the market is very wide. The manufacturer classifies the product according to a number of indicators to make choosing the right one easier. According to the composition they are distinguished:

1. Mineral. Obtained by refining oil. There are paraffinic, aromatic and naphthenic oils. This liquid is poured into older model cars. High viscosity minimizes the formation of oil leaks in areas of increased wear of parts. Mineral oil is allowed to be poured into modern cars only if the load on the power unit is low.
2. Synthetic or artificially made. This type of fuel and lubricants has a medium viscosity and performs well under conditions of frequent climate change or high engine loads. The only drawback is the high cost.
3. Semi-synthetic (a mixture of mineral and synthetic). They are used under conditions of average engine load and have a stable composition. The best combination of price and quality, which is why most car owners prefer this type of lubricant.
4. Hydrocracking. Mineral oils with improved characteristics. The addition of additives improves their performance properties. The main disadvantage is a change in the structure of the liquid, which leads to so-called “aging”.

According to the period of operation, all-season, winter and summer oils are distinguished. By engine type - for gasoline and diesel engines.

When choosing motor oil for your car, do not forget to check its compatibility with the engine.

Changing the oil in the Mazda CX-5 engine must be carried out on time so that the fluid performs its main functions:

• formation of a film on the surfaces of rubbing mechanisms;
• heat removal that occurs due to fuel combustion;
• preventing the appearance of slag deposits;
• removal of combustion products from the friction zone.

What oil to pour into Mazda CX 5

When deciding what kind of oil to fill in the Mazda CX-5, first of all, you should pay attention to the recommendations of the crossover manufacturer. It is advisable to know both the frequency of its replacement and the amount of lubricant that will be required for a complete or partial replacement of lubricating fluids.

The correct approach to choosing engine and transmission oils for the CX-5 will ensure a long service life of the vehicle, allowing you to avoid overheating, accelerated wear and rapid failure of both the power unit and gearbox.

Choosing oil for the Mazda CX 5 engine

The automaker and its official dealers recommend using branded lubricants such as Mazda Super Premium 5W-20 and Mazda Original Ultra 5W-30 for the crossover. However, the high cost of original oils has led car owners to use other options that practically do not differ in characteristics. The cost of analogues is 1.5-2.5 times lower.

The optimal types of engine oil for Mazda CX5 2021 and other years and the timing of its replacement include:

• 0W20, which is recommended to be filled every 8-12 thousand km. The short service life of a consumable indicates that the manufacturer is not confident in its reliability.
• 5W20 - a lubricant that is recommended more often and is changed no more often than after 10-15 thousand km (depending on the operating conditions of the crossover);
• 5W30 is the best option, the replacement period of which under ideal conditions can reach 20 years.

Even knowing the viscosity, you should only pour oil into the Mazda CX 5 after checking its other characteristics. First of all, the specification, which for the Russian Federation and EU countries should be either ACEA A3/A5 or API SL/SM/SN.

If the oil is American, compliance with ILSAC GF-5 class is required. For Japanese lubricants, compatibility with CX-5 will be ensured by the ILSAC GF-4/GF-5 or API SM/SN designations located on the packaging.

Having figured out which oil is best to pour into the Mazda CX 5, you should also take into account its quantity - this will help you choose the right container size (it is advisable to buy lubricant in larger quantities, although it is also not recommended to make large “reserves”).

For cars with 2.0 engines (Skyactiv-G), replacement will require 4.2 liters. When servicing a 2.5 liter power unit, it is worth stocking up on 4.5 liters of oil. 2.2 Sky Diesel engines require from 5 to 5.1 liters for complete replacement.

Depending on the type of oil chosen, the size of the container (which is usually liter, 4-liter and 5-liter), place of purchase and viscosity, you will have to pay from 350 to 750 rubles for 1 liter. This means that the cost of a complete replacement of lubricant for a 2.0-liter power unit is 1260-3150 rubles, for a 2.5-liter one - from 1350 to 3400 rubles, for a diesel engine - from 1350 to 3800 rubles.

Selecting oil for automatic transmission and manual transmission Mazda CX 5

In addition to motor lubricants, fluids that ensure the normal operation of automatic transmissions and manual transmissions also require periodic replacement. The average frequency of filling oil into a Mazda CX 5 manual gearbox is about 60,000 km. For automatic transmissions, there is no exact time limit - but the manufacturer recommends doing this at least every 100,000 km.

Good options for manual transmission crossovers are branded oils – Mazda FRT Axle Lube 75w90 or Genuine Mazda 75W-90 Premium 4×4. When replacing lubricants in a CX-5 automatic transmission, preference is given to options with ATF FZ approval - for example, Top Tec ATF 1800. Suitable for the automatic transmission of this car and Mazda Dexlia Original Oil ATF MV.

Oil volumes depend not on engine characteristics, but on the type of transmission and replacement option. If the lubricant is completely changed on an automatic machine, up to 16 liters may be needed or, taking into account the cost of the material, from 13 to 16 thousand rubles. To service the “mechanics,” the car owner should prepare from 1.7 to 2.5 liters of transmission oil, spending from 1,700 to 3,800 rubles.

(1

ENGINE OIL CHANGE PERIOD

The appearance on the market of a new powerful SkyActiv engine often baffled even experienced car owners regarding the selection and replacement of lubricant. The replacement period has also sometimes generated heated debate. During the warranty period, you cannot argue with the dealer; recommendations for changing the oil are included in the mandatory maintenance to maintain the warranty. The manufacturer has set oil change intervals every 15,000 km; this period, in their opinion, is optimal for uninterrupted operation during operation. An oil change, along with this, should take place at least once a year, which will help prevent malfunctions and maintain the operating condition of the vehicle's mechanical systems.

Everything is clear with the warranty period; the dealer takes care of the car for the next 3 years or 100 thousand km. Afterwards - at the discretion of the owner. You can continue to adhere to the specified maintenance schedule. Some believe that the car was used in difficult conditions and change the engine oil at 7,500 km; some, at their own peril and risk, delay the replacement until 20,000. To independently care for the CX-5, you may need the following information.

Also read: Automatic transmission oil Mazda 3