- Laser tag in St. Petersburg
- Reviews of real weapons
- Submachine guns
- PP-2000PP-2000
In 2001, Tula gunsmiths developed the PP-2000 submachine gun specifically for anti-terrorist units. Its main advantage is the increased density of fire during close combat. A convenient design with a minimum number of parts, maximally adapted for concealed carry, can be disassembled within 30 seconds. In all respects, the Russian model is superior to European models in this class of small arms.
Design
The submachine gun is built on the basis of automatic blowback action; fire is fired from a closed bolt. The trigger mechanism is trigger type. The PP-2000 body is made of high-strength plastic. The bore is chrome plated. Traditionally for compact submachine guns, the pistol grip also serves as the magazine opening. The massive trigger guard can be used as a fire control handle[1], and also allows you to fire the weapon without removing thick gloves. A special feature of this submachine gun is the ability to use a spare magazine as a shoulder rest[1]. The fire mode switch safety switch is located only on the left side of the weapon, however, the bolt cocking handle and the magazine release button can be reinstalled on any side[2].
Since 2006, serial PP-2000s have been equipped with a removable side-folding metal shoulder rest[1][6], and at the DEFEXPO arms exhibition (February 2010)[7] a variant with a more convenient non-folding plastic buttstock of a skeletal design was presented[ 8].
The PP-2000 can also be equipped with a silencer, a visible or infrared laser sight, a collimator or optical sight, night vision devices and a tactical flashlight[1].
A universal sighting bar is installed on the receiver cover of serial PP-2000[9][10].
general information
The device made it possible to achieve impressive results in terms of destruction range - up to 300 meters. In the year of release, it was ahead of all major competitors, including foreign products. Most effective when used in close combat: it shows excellent shooting density. To achieve optimal dimensions, the design was devoid of unnecessary spare parts. The dimensions and structure of the body allow the pistol to be carried covertly.
The body is made of high-strength plastic, parts of technical components are made of weapons-grade steel. The use of plastic for the body eliminates the possibility of corrosion. At low temperatures, PP-2000 does not have a cooling effect. The design includes a flame arrester, which reduces the likelihood of detecting the shooter in the dark. Thanks to the simplicity of the design, it was possible to achieve a minimum weight of 1.5 kilograms and a high disassembly speed of no more than 30 seconds.
The weapons community saw the gun for the first time in 2006 at a Moscow exhibition. In the same year, mass production began. The main customers of weapons are detachments of the Ministry of Internal Affairs of the Russian Federation and the Federal Bailiff Service.
Owners love this submachine gun for the uniqueness of its cartridges. When hitting a hard surface, there is no ricochet. Thanks to this, combat units use it in closed spaces of a small area, free hostages, etc.
Ammunition used
The PP-2000 submachine gun can use various 9x19 mm cartridges, including:
- commercial cartridges 9×19 mm,
- military cartridges 9×19 mm,
- 9x19 mm cartridges with the Russian-developed 7N31 armor-piercing bullet[4] - provide penetration of 8 mm steel sheet at a distance of up to 10 m[1], 5 mm at a distance of 45 m and 3 mm at a distance of up to 80 m[4].
The dispersion size of the best half of the bullets when shooting at a distance of 100 m is [2]:
- shooting prone with the hand single - 25×25 cm;
- in bursts - 100×100 cm;
- single - 40x40 cm;
What are submachine guns?
In Russian legislation, the definition of this category of weapons was given when drawing up the first GOST standards. The characteristics of this type of weapon have been preserved to this day. In our country, this category includes a weapon, which is a type of machine gun that is powered by pistol ammunition.
The submachine gun is a shortened version of the usual machine guns. It allows the user to fire in automatic mode. It can be held in one or two hands, and can also be used in a shoulder-rest position.
Notes
- ↑ 12345678910111213141516171819
Description of PP-2000 on the manufacturer’s website - ↑ 12345
Yuri Ponomarev. PP-2000 originally from Tula // Kalashnikov magazine. Weapons, ammunition, equipment", No. 12, 2005. pp. 58-66 - Ultra-compact PP-2000 // “Weapon” magazine, No. 12, 2004, pp. 1-3, 60-61
- ↑ 123
Evgeny Baumgarten. Small arms for detention groups. // NSB magazine “Guardian”, February 28, 2007 - Submachine gun PP-2000 (serial) // “Soldier of Fortune” magazine, No. 12 (147), 2006, pp. 24-25
- " PP-2000.
The person involved has also been overexposed for a long time, but in the new version he got rid of the original shoulder rest in the form of a 44-round magazine and acquired a completely traditional folding butt. " "Master Gun" magazine, No. 9 (114) 2006. p.13 - magazine "Weapon", No. 6, 2010, p.13
- "Weapons" magazine, No. 1, 2011, p. 6 (photo)
- magazine "Master Gun", No. 9 (114) 2006. p. 13 (photo)
- “ The PP-2000 is supplied to law enforcement agencies already with collimator sights, Picatinny and Weaver rails.
The kit also includes adapters for installing not only a laser laser, but also a tactical flashlight » Alexey Ramm. The barrel with which they go on reconnaissance // “Military-Industrial Courier”, No. 34 (552) dated September 17, 2014 - AN UNUSUAL EXHIBIT. CARBINE OTs-126
- “ PP-2000 recently entered service... it was received by Stavropol private security units.
» Vladimir Kovalenko. Photo report: Star Wars of the Stavropol police // “Rossiyskaya Gazeta” dated October 9, 2008 - “ Private security was additionally allocated... 15 units of the latest PP-2000 submachine guns
” The Department of Private Security under the Ministry of Internal Affairs for Buryatia was visited by Police Lieutenant General Vadim Savichev // official website of the Ministry of Internal Affairs of the Republic of Buryatia, July 14, 2010 - “ Now private security units are equipped with the most modern weapons.
The arsenal includes domestic submachine guns “PP-2000” » Kirill Kogan. Private security celebrates its 60th anniversary // State Television and Radio Broadcasting Company "Murman" dated October 29, 2012 - “ December 17, 2012... a policeman-driver of the private security department fired a burst from a PP-2000 submachine gun at his colleague
” 12/18/2012 In “new Moscow” a policeman shot at a colleague with his service weapon - Decree of the Government of the Russian Federation No. 776 of October 2, 2009
- MrBurjuin (2016-10-25), Alpha Group of the National Security Service of Armenia/Alpha Group.
National Security Service of Armenia , . Retrieved October 26, 2020.
Specifications
The main performance characteristics of the PP-2000 include:
- The cartridges used are 9x19 mm caliber;
- Length in combat condition - 58.2 cm;
- Length when folded - 35 cm;
- Height with standard magazine - 19 cm;
- Height with extended magazine - 30.5 cm;
- The weight of the unloaded weapon is 1.4 kg.
Maximum rate of fire is 10 rounds per second. The designers achieved the lowest rate of fire in this class. The device does not include retarding mechanisms. The result was laid down at the design stage, when the parameters of the trigger and mainspring were determined.
The gun's configuration includes a 44-round magazine. It can be carried with you or installed instead of a stock. During combat, it can be easily removed, after which it can be used to replace an expended magazine. You need to remember the disadvantages of this arrangement: the walls of the magazine can be damaged during operation, and it is less convenient than a classic stock.
The use of a silencer is provided, which increases the camouflage of the shooter. The muffler is non-separable, therefore it has minimal weight and is easy to install and remove. You can install a laser pointer and a flashlight on special strips. PP-2000 is the best option in the submachine gun category. It has high-level tactical and technical characteristics, significantly ahead of Russian and foreign competitors.
The PP-2000 submachine gun was first publicly demonstrated in the summer of 2004 at the Eurosatori 2004 exhibition in Paris and in the fall at Interpolitex-2004 in Moscow. The first thing that attracts attention is the small size and unusual shape of the submachine gun. Its dimensions are comparable to those of a modern combat pistol.
The layout of the PP-2000 can be called traditional - the fire control handle located in the center of gravity serves as a neck for a box magazine with a capacity of 20 or 44 rounds. What gives the submachine gun a somewhat unusual appearance is the front handle, which is connected by a jumper to the fire control handle and forms a spacious trigger guard, allowing you to hold the weapon with both hands and fire with thick gloves.
To fire the PP-2000, standard 9x19 mm Par cartridges can be used. When firing from the PP-2000, steel sheets 3 mm thick are penetrated at a distance of 90 m, 5 mm - at a distance of 50 m, and at distances of up to 15 meters, the bullet of this cartridge penetrates steel 8 mm thick!
The rate of fire of the PP-2000, despite its short length, is about 600 rounds per minute.
| MINISTRY OF INTERNAL AFFAIRS OF THE RUSSIAN FEDERATION PROFESSIONAL TRAINING CENTER OF THE MIA RUSSIA OF THE RF IN THE IVANOVO REGION METHODOLOGICAL MATERIAL on the discipline “Fire training” The educational and methodological manual was prepared by specialists of the Training Center of the Ministry of Internal Affairs of the Russian Federation in the Ivanovo Region Ivanovo 2013 CONTENTS |
| the “Fire” command, upon which the student removes the weapon from the safety and continues shooting. After the command “Stop, cease fire”, as well as at the end of shooting in case of incomplete use of ammunition, the command “Unload” is given. At the “Unload” command, the trainee: removes the magazine from the base of the pistol handle, turns off the safety, removes the cartridge from the chamber (if there is one), turns on the safety, puts the weapon in the holster, removes cartridges from the magazine (if there are any), removes the pistol from holster, inserts the magazine into the base of the grip, removes the weapon into the holster and fastens it. TOPIC: SUBMACHINE GUNS A submachine gun is a portable automatic weapon that uses pistol cartridges and has the ability to fire bursts. The Russian police departments have adopted the following types of domestically produced submachine guns: PP-90; PP-91 “Cedar” and “Cypress”; "Kedr-B"; "Wedge"; PP-93; "Buffalo"; "Bison-2"; PP-2000. Purpose, combat properties and design of the 9-mm PP-91 “Kedr” submachine gun The 9-mm PP-91 “Kedr” submachine gun designed by E. Dragunov (Fig. 24) is an individual weapon of attack and defense and is designed to hit targets at a distance of up to 50 meters. To fire a submachine gun, 9 mm Makarov pistol cartridges are used. It is in service with special forces units of Fig. 24 General view of the PP-91 “Kedr” submachine gun. Tactical and technical characteristics: Caliber, mm | |
| Cartridge, mm | 9x18 |
| Initial bullet speed, m/s | |
| Magazine capacity, pcs. Patr. | 20, 30 |
| Rate of fire, rds/min. | 800-850 |
| Length, mm: with folded butt with folded butt | |
| Length, mm: barrel sighting line |
| pp. Topic: Fire training as an integral part of the professional skills of internal affairs officers. |
| NOP-2012, as a programmatic and normative basis for fire training in divisions and institutions of the Ministry of Internal Affairs of Russia. |
| The purpose and objectives of fire training for police officers. |
| Practice of application and use of firearms by police officers. |
| Assessment of fire training in internal affairs bodies. |
| Topic: Regulatory framework for fire training. |
| Rules for handling weapons and ammunition upon receipt and delivery. |
| Safety measures when handling weapons while on duty, conducting training at a shooting range and in open areas. |
| Requirements for organizing and conducting shooting. Rights and responsibilities of persons organizing and servicing shooting. |
| Contents of Art. 222 – 226 of the Criminal Code of the Russian Federation. |
| Topic: Basics of small arms shooting. |
| The phenomenon of a shot, the characteristics of its periods. |
| The initial speed of the bullet and its energy. |
| Using the energy of powder gases to operate automatic weapons. |
| Barrel wear resistance. Causes of trunk destruction. |
| Explosives and their classification. use of explosives. |
| Flying a bullet in the air. The concept of trajectory. Trajectory elements. The shape of the trajectory, its practical significance. |
| The influence of various conditions on the flight of a bullet and taking them into account when shooting. |
| Factors influencing accuracy and accuracy of fire. The average point of impact and methods for determining it. |
| Topic: Purpose, performance characteristics (TTX), design and operating principle of 9 mm PM. |
| Purpose, performance characteristics of the 9 mm Makarov pistol. |
| Design and principle of operation of the PM. |
| The procedure for partial disassembly and assembly of the PM. |
| Operation of PM parts and mechanisms. |
| Belonging to the PM. |
| Ammunition for PM. |
| Procedure for cleaning and lubricating the gun. |
| Storage and conservation of PM and ammunition. |
| Preparing a pistol for shooting, inspecting ammunition. |
| Bringing the pistol to normal combat. |
| Delays during shooting and ways to eliminate them. |
| Development of standards for fire training for PM. |
| Topic: Purpose, performance characteristics (TTX), design and principle of operation of the 5.45 (7.62) mm Kalashnikov assault rifle (AK). |
| Purpose, performance characteristics of 5.45 (7.62) mm Kalashnikov assault rifle. |
| Modifications of the Kalashnikov assault rifle. |
| AK device and principle of operation. The procedure for partial disassembly and assembly of an AK. |
| Operation of AK parts and mechanisms. |
| AK affiliation. Ammunition for AK. |
| Procedure for cleaning and lubricating the machine. Storage and conservation of AKs and ammunition. |
| Preparing the machine gun for firing, inspecting ammunition. |
| Bringing the machine gun to normal combat. |
| Delays during shooting and ways to eliminate them. |
| Development of standards for fire training for AKs. |
| Techniques and rules of pistol shooting. |
| Preparing to shoot |
| Holding a pistol when shooting with two hands (3rd option): Firmly grasp the handle of the pistol so that it is located between the thumb and forefinger of the right hand, which form a fork. Place the wrist of the hand with the pistol in the open palm of the free hand and grab the hand with the pistol with your palm from the front under the trigger guard and slightly below, fixing the position of the fingers of the hand holding the weapon. While aiming, both eyes must remain open, i.e. try not to squint. The gaze should be focused on the rear sight of the pistol, while the front sight is installed in the rear sight at the level of the rear sight shoulders and should not be higher or lower than the rear sight shoulders, and should not be pressed against the left or right wall of the rear sight slot. To release the trigger, you must: firmly hold the pistol handle, hold your breath, and smoothly press the trigger until the trigger is released from the cocking position unnoticed by the shooter, i.e. until the shot is fired. When releasing the trigger, you should not attach importance to slight vibrations of the level front sight at the aiming point. When practicing aiming and releasing the trigger, it is necessary to achieve: - releasing the trigger should not displace the weapon aimed at the target, i.e. should not disrupt the aiming; — the trigger should be pulled in full accordance with visual perception, i.e. timed to coincide with a certain moment when the “flat front sight” is at the aiming point. Consequently, to achieve a well-aimed shot, a smooth pull on the trigger is practiced and aiming is carried out not separately, but strictly coordinated with each other. QUESTION No. 3. STOP FIRING AT THE TEAM. If there is a need for a temporary ceasefire, the command “Stop, cease fire” is given. At this command, the shooters stop shooting and put their weapons on safety. To continue shooting, the |
| Literature |
TOPIC: FIRE TRAINING AS A COMPONENT OF PROFESSIONAL SKILLS OF INTERNAL AFFAIRS EMPLOYEES.
Study questions:
1. NOP-2012 as a programmatic and normative basis for fire training in divisions and institutions of the Russian Ministry of Internal Affairs.
2. The purpose and objectives of fire training for police officers.
3. The practice of using and using firearms by police officers.
4. Assessment of fire training in internal affairs bodies.
3
Currently reading about:
Calculation of the cost of tourism products
Types and genres of scientific style
Schools of Management
Feudal fragmentation. Vladimir-Suzdal Principality, Galicia-Volyn Principality, Novgorod
Goncharova O. M. Lomonosov’s poetic heritage and Russian poetry of the 19th – 20th centuries.
The main directions of poetry of the Silver Age
Heaven is above all; there sits a Judge whom no one can bribe. © William Shakespeare ==> read all sayings... 929
832
Did you like the site? Share it with your friends:
Incomplete disassembly
To keep the weapon in excellent condition, regular maintenance is required: cleaning and lubricating parts, checking the serviceability of technical components. To do this, you need to know how partial disassembly is carried out:
Partial disassembly with a trained hand takes no more than 2-3 minutes. Assembly must be carried out in reverse order.
Modification PP-2000 Vityaz
Recently, news sources appeared information about a new model of a submachine gun based on the PP-2000. This information is completely incorrect. "Vityaz" is a product of the Izhevsk arms factory. It is based on the PP-19-01, and was carried out on the basis of the AKS-74U and AK-105 assault rifles. Obvious differences with the PP-2000 can be seen in photographs on the Internet.
