What kind of oil to pour into the Nissan Qashqai engine

Depending on the degree to which the Nissan Qashqai engine is loaded, the wear of individual rubbing parts directly depends on the quality of service, and this includes timely replacement of engine oil. The quality of the oil and the frequency of replacement directly affect the level of production of rubbing parts. First of all, care must be taken to minimize friction between the metal elements of the engine, maintain optimal operating temperature and remove combustion elements from the engine that accumulate in the unit.

Engine reliability is not always the merit of the manufacturer, since the first place, as mentioned above, is timely replacement of engine oil and quality service.

Engine oil is not exactly something you should skimp on, but high-quality oil guarantees better lubrication of the engine's rubbing parts. When selecting engine oil for Qashqai, it is worth considering two important points: climate and engine load.

In most cases, Nissan engines on modern models use synthetic oil 0W-30 and 5W-30, which has a low viscosity and which also helps to save fuel. These motor oils are used by most Nissan Qashqai J10 owners, and in some climate zones it can also be used as an all-season oil. Depending on several factors, such as climate zone, load intensity, mileage, it is possible to fill the Nissan Qashqai power unit with other engine oils, for example 0W-20, 0W-30, 0W-40, 5W-40 or 10W30.

When to change

Constant cooling and heating of engine oil inevitably reduces its protective characteristics, which is why it is important to change engine oil on time.

Nissan recommends changing the engine oil every 8,000-15,000 km, but this is not entirely correct, because the intensity of the engine’s operation plays a major role.

With constant trips over long distances outside the city and moderate loads, by 5000 km the oil wears out by 50%, therefore, depending on the average speed, it is possible to change the oil at 10,000 km. Quite the opposite with constant trips around the city: traffic jams, short distances, low average speed - these are very difficult conditions for the power unit, and an oil change is recommended at 5000 km, maximum at 7500 km.

Engine hours

But it is worth considering that each car owner has an individual route, and in this regard, first of all, it is necessary to take into account the engine hours.

The engine watch will best tell you when to change the oil in a Qashqai J10, be it a 1.5, 1.6 or 2.0 engine:

  • 250 mph - with engine load;
  • 300/320 mph - acceptable with partial use of the car, or outside the city;

Engine hours: ...

Oil compliance with service life hours:

Oil typeResource, engine hours
Synthetic oils
API SM/SN300-350

How much oil to fill in Nissan Qashqai

When pouring engine oil into a Nissan engine, the version before or after restyling and the types of power plants are also taken into account.

1st generation

  • HR16DE – 4.3 l;
  • MR20DE – 4.4 l;
  • K9K Euro 4 – 4.6 l;
  • K9K Euro 5 – 4.4 l;
  • M9R – 7.4 l;
  • R9M – 5.5 l.

2nd generation

The version after restyling received only one fundamentally new engine - HRA2DDT with a crankcase filling volume of 4.63 liters. In other versions of the Nissan Qashqai internal combustion engine, the compartment capacity remains unchanged.

Which one to choose

One of the frequently asked questions regarding maintenance is what to put into the Nissan Qashqai power unit?! There is no universal solution to this issue, since a number of points need to be taken into account before making a choice.

  • engine condition and mileage;
  • ambient temperature;
  • driving style;

The city is the busiest because there are constant stops, short distances, traffic jams, traffic lights, etc. on the route. The best mode for the engine is suburban mode: constant speed and stable revolutions.

It is also worth taking into account the temperature regime. In the summer, it is best to pour 5W-30 or 5W-40 oil into the Nissan Qashqai J10; in winter, the viscosity must be reduced - 0W-20 or 0W-30. The right oil promotes stable engine operation, better starting in cold weather, and reduced fuel consumption.

The next factor is the condition of the engine. After 100 thousand km, the parts of the unit wear out and it is advisable to use thick motor oil, for example 0W-40 or 5W-40.

Viscosity grade, SAETemperature range, °C
Winter, -Summer, +

At the factory, the Qashqai engine is filled with Nissan Strong Save-X 5W-30 (KLAN5-05304) or Nissan Motor Oil 5W-40 oil.

Recommendations for changing the oil from car developers

  • in order to maximize the life of the power unit, it is advisable to replace the lubricant once a year;
  • It is recommended to change the oil every 14-15 thousand km. car mileage;
  • if the car is used in difficult technical conditions, then it is better to change the oil twice a year after 7-8 thousand km. mileage

The process of changing the lubricant itself is quite simple and can be done by hand, provided there is an inspection hole.

What kind of oil to fill in Nissan Qashqai 2.0 is recommended by the car developer:

The developer of this car recommends using synthetic with a viscosity of 5W-40. The lubricant catalog number is KE900-90042. To change the oil you will need 4.5 liters. lubricant. You need to purchase it at auto stores that service this particular brand of car.

Good to know: Nissan 5w40 engine oil characteristics

What oil to fill in Nissan Qashqai 2.0 based on reviews from car owners:

According to the study of reviews from car owners on various forums, you can determine which oil to fill in the Nissan Qashqai 2.0, in addition to that recommended by the developer of this car brand:

  1. SHELL HELIX HX8 is the most popular lubricant that is reliably protected from counterfeiting.
  2. CASTROL MAGNATEC 5W-30 A3/B4 provides the engine with the maximum possible protection against excessive friction and overheating.
  3. RAVENOL HCS SAE 5W-40 is characterized by high detergency, which ensures an increase in the interval between oil changes.
  4. LIQUI MOLY OPTIMAL SYNTH 5W-30 lubricant effectively and quickly removes soot deposits in the power unit and has the best compatibility with other brands of oils.

Best oil

Nissan recommends using Nissan synthetics in the Qashqai engine:

  • for petrol HR16DE 1.6 and MR20DE 2.0 - 5W-30 (KE90099933R - 1 liter, KE90099943R - 5 liters) and 5W-40 (KE90090032R - 1 liter, KE90090042R - 5 liters);
  • for diesel engines with particulate filter K9K 1.5, R9M 1.6 and M9R 2.0 - 5W-30 DPF (KE90090033R 1 l., KE90090043R 5 l.). For K9K without particulate filter - 5W-40 (KE90090032R 1 l., KE90090042R 5 l.);

But in addition to what is recommended by the manufacturer, it is permissible to use high-quality oils from global lubricant manufacturers, for example: Total, Shell, Liqui Moly, Motul, Elf.

Below is a list of oils created based on positive feedback from Qashqai owners:

ELF Evolution 900 NF 5W-40
Gulf Formula G 5W-40
Idemitsu Zepro Touring 5W-30
Kendall GT-1 Euro+ 5W-30
Kixx G1 SN 5W-30
Kixx G1 SN 5W-40
Leichtlauf High Tech LL 5W-30
LIQUI MOLY Synthoil High Tech 5W-40
Mobil1 Extended Performance 5W-30
Mobil1 x1 5W-30
Mobil1 Super 3000 x1 5W-40
Motul1 8100 X-CESS 5W-40
Petro-Canada Supreme Synthetic 5W-30
Shell Helix Ultra 5W-40
Quaker State Advanced Durability SAE 5W-30
Total Quartz 9000 FUTURE NFC 5W-30
Total Quartz 9000 ENERGY HKS G-310 5W-30
TOTAL Quartz 9000 5W-40
Valvoline Synpower 5W-40
AMSOIL Signature Series 0W-30
Elf Excellium Full-Tech 0W-30
Motul 8100 Eco-Lite 0W-20 SN
Nissan Motor Oil 0W-30 (KE900-90132 1 l)
Petro-Canada Supreme Synthetic 0W-30
Shell Helix Ultra AS 0W-30
Total 9000 Energy Fuel Economy 0W-30
United Eco Elite 0W-20 API SN

The more popular the oil, the greater the chances of buying a fake. Therefore, it is extremely important to buy motor oil from a trusted store.

Which one is better to choose is up to you to decide, since you should take into account the available range, service budget, and the credibility of the seller. It is important to take into account that there is a large volume of counterfeits on the market; therefore, we first recommend visiting the official website of the oil manufacturer and checking the location of retail outlets in your locality.


As can be seen from the information presented above, Nissan Qashqai does not have any particular problems with replacing lubricant. There are recommendations from car developers and there are worthy analogues that can be safely used if it is not possible to purchase the brand recommended by the manufacturer. The entire process of replacing the lubricant is quite simple, and therefore it can be done independently at home.

Good to know: Why do the car windows fog up, what should I do?

Sometimes the question arises, what kind of oil to fill in Nissan Qashqai 1.6. Based on reviews from many motorists and recommendations from the developers of the Nissan Qashqai, we can say with confidence that the engines are 1.6 and 2.0 liters. This model can use the same brands of lubricant.


When changing Nissan Qashqai oil, it is recommended to follow the engine manufacturer’s approvals; therefore, it is worth pouring the following oil:

ILSAC group GF-3 or GF-4
ACEA A1/B1, A3/B3, A3/B4, A5/B5, C2 or C3
K9K with particulate filterACEA A1–B1, SAE 5W-30 low saps
ACEA C4, SAE 5W-30 low saps
K9K without diesel particulate filter (DPF)ACEA A1–B1, SAE 5W-30
M9R without particulate filterACEA B4, SAE 5W-40 or 0W-40
M9R with particulate filterACEA C4, SAE 5W-30 low saps
R9MACEA C4, SAE 5W-30 low saps

Nissan Qashqai J 11 from 2013

Oil characteristics

According to the manual, it is recommended to use lubricants that meet the following parameters:

For HRA2DDT engines:

  1. NISSAN branded motor fluid;
  2. according to ACEA standard - A3/B4.

In MR20DD power units:

  1. NISSAN branded engine oil;
  2. according to ACEA specification - A3/B4

In K9K auto engines:

  1. NISSAN branded lubricant;
  2. ACEA quality class - C4;
  3. "Low SAPS" (low ash).

For R9M auto engines:

  1. original NISSAN engine oil;
  2. ACEA quality class - C4;
  3. "Low SAPS" (low ash).

Refill capacity

Oil volume required for replacement, with and without oil filter:

Oil viscosity

The manufacturer's recommendations for choosing engine oil viscosity are as follows:

  1. For engines running on gasoline, it is preferable to use 5w - 40. If this fluid is not available, you should choose oil according to scheme 2.
  • In diesel K9K engines with a particulate filter, it is recommended to use only liquids 5w - 30 of the “Low SAPS” group (low ash).
  1. For R9M units operating on diesel fuel, it is allowed to use only 5w - 30 DPF group “low SAPS” (low ash).

Scheme 2. Classification of motor oils by viscosity characteristics for gasoline engines depending on the ambient temperature range.

According to Scheme 2, you can select the following motor oils:

  1. 5w - 30; 5w - 40 at temperatures -30°C (or less) to +40°C (and above);
  2. 10w - 30; 10w - 40; 10w - 50 in the temperature range -20°C to +40°C (or more);
  3. 15w - 40; 15w - 50 in conditions -15°C to +40°C (or more);
  4. 20w - 40; 20w - 50 with a temperature range from -10°C to +40°C (or more).

How much to fill

The Nissan Qashqai engine holds from 4.1 to 7.4 liters of oil. The table below presents a list of engines installed on the Qashqai J10 and the required amount of oil when replacing.

With oil filter replacement4,34,44,6/4,47,45,5
No filter replacement4,14,24,4/4,37,05,1

Since a small amount of oil remains in the system when drained, a little less new oil is placed into the system.

The information provided above is also relevant for another Nissan model range with the same power units under the hood:

ModelYear of issue
AD Y122006-2016
Almera N162003-2006
Bluebird Sylphy G112005-2012
Dualis J102007-2014
Juke YF15since 2011
Lafesta B302004-2012
March K13since 2013
Micra K12C2005-2010
Micra C+C K122007-2010
Note E112005-2013
Note E12since 2008
NV150 ADsince 2016
NV200 M20since 2009
Qashqai+2 J102008-2014
Pulsar NB172014-2018
Sentra B162006-2012
Sentra B17since 2014
Serena C252005-2010
Tiida C112007-2014
Tiida C132015-2016
Versa C16since 2010
X-Trail T312007-2015
X-Trail T32since 2013
  1. Nissan oil
  2. Engine
  3. Qashqai J10

Nissan Qashqai engine - how much oil

First generation J10, 2006-2013

The first generation Qashqai is the first Nissan model to be entirely developed in Europe. In Japan and Australia, the car was given the original designation Dualis, and a similar model called Rogue was supplied to the USA. Due to its high popularity in Europe, the Qashqai is considered to be one of the first compact crossovers, even more affordable than the Toyota RAV4. On the Russian market, the model was presented with 1.6 and 2.0 liter gasoline engines (114-141 hp). Gearboxes - manual or variator. Diesel modifications with a volume of 1.5, 1.6 and 2.0 liters (from 103 to 150 hp) were also supplied to Europe. In 2008, sales of a seven-seater modification of the Qashqai+2 with an extended wheelbase (+135 mm) began.

Also read: Automatic transmission oil for Nissan Patrol

Gasoline engines 2006-2013

  • 1.6 114 l. With. (HR16DE), oil volume - 4.3 liters, tolerance and viscosity: API-SL, SM; SAE 5W-40, 10W-40, 0W-40, 10W-30, 5W-40
  • 1.6 115 l. With. (HR16DE), oil volume - 4.3 liters, tolerance and viscosity: API-SL, SM; SAE 5W-40, 10W-40, 0W-40, 10W-30, 5W-40
  • 1.6 117 l. With. (HR16DE), oil volume - 4.3 liters, tolerance and viscosity: API-SL, SM; SAE 5W-40, 10W-40, 0W-40, 10W-30, 5W-40
  • 2.0 141 l. With. (MR20DE), oil volume - 4.4 liters, tolerance and viscosity: API-SL, SM; SAE 5W-40, 10W-40, 0W-40, 10W-30, 5W-40

Second generation J11, 2013-….

The Qashqai J11 has completely changed its design concept and has become similar to the more expensive X-Trail. The streamlined body of the car is endowed with dynamic proportions, but is not without angular shapes. This creates a strict and neat design. In 2021, a modernized version of the Qashqai was released with a modified exterior. The car's interior, in comparison with its predecessor, stands out with improved finishing and advanced functionality. In Russia, the crossover is available with gasoline engines of 1.2 and 2.0 liters (115-144 hp), as well as a 1.6-liter diesel engine with a capacity of 130 hp. With.

Gasoline engines since 2014

  • 1.2 115 l. With. (H5FT), oil volume - 4.6 liters, tolerance and viscosity: API-SM, SN; SAE 5W-40, 10W-40, 0W-40, 10W-30, 5W-40
  • 2.0 144 l. With. (MR20DD), oil volume - 3.8 liters, tolerance and viscosity: API-SM, SN; SAE 5W-40, 10W-40, 0W-40, 10W-30, 5W-40

Diesel engines since 2014

1.6 130 l. With. (R9M), oil volume - 5.5 liters, tolerance and viscosity: API-CI-4, CJ, CJ-4; SAE 5W-40, 10W-40, 0W-40, 10W-30, 5W-40

( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]