Body geometry VAZ 2115 engine compartment

Cars VAZ-2115i-14i-13i

Vehicle specifications:

Read more »

The location of the vehicle controls complies with UNECE standards and regulations. For ease of use, handles, buttons, switches and control devices located on the instrument panel are marked with functional symbols.

Read more »

1.3. Layout diagram of the VAZ-21099 car: 1 – radiator; 2 – engine; 3 – carburetor; 4 – spare wheel; 5 – muffler; 6 – drum brake; 7 – rear shock absorber strut; 8 – rear suspension beam; 9 – fuel tank; 10 – resonator; 11 – steering rod lever; 12 – disc brake; 13 – front shock absorber strut

Read more »

Cars such as the VAZ-2115 sedan with a four-door body and the VAZ-2114 hatchback with a five-door body and VAZ-2113 with a three-door body are created on the basis of the VAZ-2199, VAZ-2109, VAZ-2108 cars, respectively, so many of their components and assemblies are unified. After the final cessation of production of models of the “eighth” family in Togliatti in 2004, the modernized cars received the common name LADA SAMARA-2.

Read more »

1.11. Interior ventilation and heating controls:

Read more »

The vehicle model and number, engine model, manufacturer's name, design options and configurations are indicated on the identification plate attached under the hood on the partition of the engine compartment.

This is what the identification plate looks like:

Read more »

Design Features

Model 2114 was built on the basis of the VAZ 2109, it is a restyled version. The hatchback received a new steering column, a modernized dashboard, an updated one and a half liter engine, redesigned for Euro 2 protocol. The VAZ 2114 shares the same wheelbase with the Nine, 2460 mm. The configuration of the bottom panel is the same for the models.

Are there any differences between 2114 and 2115

The VAZ 2115 model is considered a related model. The hatchback is built on the basis of the VAZ 21099 with various transport sizes and shares one wheelbase with the entire Lada Samara family. The standard dimensions of the bottom and sills for VAZ 2108, 2109, 21099, 2113, 2114, 2115 models are the same and interchangeable.

The bottom of the VAZ 2114 structurally consists of the following parts:

• central reinforced panel;
• driver's side panel;
• side passenger;

The factory stock bottom is a one-piece stamped part, primed and painted black. The polyethylene coating acts as protection.

Vehicle structure and systems

Removal Place the VAZ 2115 - 14 car on a lift or inspection ditch. Raise the engine hood and lock it in this position. Next, perform the following steps: - disconnect the wires from the battery, from the starter traction relay - disconnect the ground wire from the clutch housing - disconnect the lower part of the clutch cable - unscrew the two upper bolts...

Read completely "

The steering of the VAZ 2115-14 car is injury-proof, with an adjustable steering column angle, with a rack and pinion steering mechanism, with two rods having rubber-metal joints on the side of the steering mechanism and ball joints on the side of the swing arms. Fig.1 Steering 1-ball joint tie rod end, 2-swing arm, 3-tie rod end, 4-lock nut, ...

Read completely "

The drive of each wheel consists of two joints of equal angular velocities and a shaft 10 (Fig. 1), which is made of a rod for the left wheel drive, and of a pipe for the right one. The outer hinge consists of a body 1, a separator 6, an inner race 3 and six balls. There are grooves in the hinge body and in the cage to accommodate the balls. Fig.1 Front wheel drive 1-outer joint housing, 2-stop...

Read completely "

VAZ 2115 -14 vehicles are equipped with a five-speed gearbox combined with a differential and final drive. Fig. 1 Gearbox 1-clutch release bearing, 2-guide bushing, 3-primary shaft, 4-roller bearing, 5-secondary shaft, 6-circlip, 7-pinion axis, 8-speedometer drive gear, 9- transport plug, 10-wheel drive oil seal, 11-roller...

Read completely "

The clutch of a VAZ 2115 car is a 14 permanently closed type, single-plate, dry, with a diaphragm central pressure spring 3 and a torsional vibration damper (damper) on the driven disk 7. Fig. 1 Clutch assembly 1-roller bearing of the input shaft, 2-support bushing of the fork clutch release, 3- pressure spring, 4- clutch housing, 5- clutch release bearing, 6- pressure...

Read completely "

The crankshaft of the VAZ 2111 engine is cast, cast iron, five-bearing. It is possible to regrind the crankshaft journals during repairs by reducing the diameter by 0.25; 0.5; 0.75 and 1 mm. The axial movement of the crankshaft is limited by two thrust half-rings. They are inserted into the cylinder block sockets on both sides of the middle main bearing, and a cermet is placed on the rear side...

Read completely "

Assemble the VAZ 2111 engine as follows. Place a clean cylinder block on the stand and screw the missing studs into it. Install the generator mounting bracket and secure it with two bolts. Lubricate the bearing shells and thrust half rings of the crankshaft, as well as the pistons and oil seals with engine oil. When assembling the engine after repair, install new...

Read completely "

Place the washed and cleaned engine on a disassembly stand and drain the oil from the crankcase. Disassembly is carried out in the following order Fig. 1. Removing components and parts of the air supply system: 1 - air filter; 2 — mass air flow sensor; 3- throttle pipe; 4- sealing gasket; 5 - receiver; 6 — exhaust pipe of the engine cooling system; 7 — fastening clamps...

Read completely "

Disassembly. If only one part needs to be replaced, then you don’t have to completely disassemble the cylinder head of the VAZ engine and remove only what is necessary for replacement. Place the cylinder head on a stand, remove the receiver with throttle pipe, and then the injector wiring harness, fuel rail, intake pipe and exhaust manifold. Remove the cooling jacket outlet pipe...

Read completely "

The cylinder head is removed from the engine on the car if the entire engine does not need to be disassembled to eliminate the problem. For example, if it is necessary to remove carbon deposits from the surface of combustion chambers and valves or to replace valves or valve guides. Remove the cylinder head in the following order: - place the car on a lift and remove the pressure...

Read completely "

Performance characteristics of the VAZ 2115 car

The exhaust emission level of this model strictly meets domestic requirements and European environmental standards EURO-3 (Euro III), and the car’s reliable power units will never let its owner down on the road.

The VAZ-2115 is equipped with a five-speed gearbox combined with a differential and final drive.

The five-speed gearbox is designed on the basis of the four-speed gearbox previously installed on cars of the Sputnik family.

The main difference between the five-speed gearbox is the additionally introduced fifth gear, the gears of which are installed in an enlarged rear cover.

PS While driving, the gearbox does not cause any difficulties, the gears are engaged smoothly (except for fifth), without jerking the car, but at high speeds (over 120 km/h) when switching from fourth to fifth gear, difficulties arise, this can lead to a shift in attention from the road on the lever and there is a danger of losing control (trust my experience)

The main power supply circuits of the electrical equipment of the VAZ 2115 car are protected from damage by fuses. Their price is small, but their help and impact are significant. After all, they protect more expensive equipment.

Protection is realized using a fuse box assembled in the engine compartment. All powerful consumers, such as the starter, wipers and high beam lamps, are connected to the on-board network via a relay and are located in the mounting block.

The Pyatnashka is equipped with a starter type 5712.3708 - this is a DC electric motor with excitation from permanent magnets, with a planetary gearbox and an electromagnetic two-winding traction relay.

Four permanent magnets are fixed in the stator housing. The armature shaft rotates in two metal-ceramic liners installed in the cover and support. Rotation from the armature shaft is transmitted to the drive shaft through a planetary gearbox. Planetary gears rotate on needle bearings. The front end of the drive shaft rotates in a sintered bushing pressed into the clutch housing.

When the starter is turned on, the voltage from the battery through the ignition switch is supplied to both windings of the starter traction relay (retractor P1 and retainer P2). After closing the contacts of the traction relay, the retractor winding is turned off.

The Fifteenth model also has engines with a distributed fuel injection system, i.e. fuel is injected by four injectors (one injector per cylinder) into the intake pipe, onto the intake valves. Here the fuel evaporates, mixes with air and enters the engine cylinders in the form of a combustible mixture. The fuel injection system reduces exhaust emissions while improving the vehicle's driving characteristics.

Repair, operation and installation of VAZ 2113, 2114, 2115 cars

….

Engine, its systems Removing the oil pan and gaskets VAZ 2110, 2113, 2114, 2115 Possible malfunctions of VAZ-2110, VAZ-2113-2115, VAZ-2170 engines...VAZ 2110, 2111, 2112 engines VAZ-21083 engine VAZ-211 engine 1 Dismantling the connecting rod and piston group of the engine VAZ 2113, 2114, 2115 Dismantling the connecting rod-piston group of the VAZ-2110, 2111, 2112 engine on a car Defect troubleshooting VAZ 2111-2112 engines Replacement of the VAZ water pump Replacement of the air filter VAZ 2113, 2114, 2115 Replacement of the diaphragm of the semi-automatic carburetor starting device ator VAZ 2110 Replacing the diaphragm starting device of the carburetor VAZ 2108- 099Replacing the diaphragm of the accelerator pump of VAZ 2108-099 carburetors.Replacing the economizer diaphragm of power modes of VAZ 2108-099 carburetors.Replacing the rear crankshaft oil seal of VAZ 2113, 2114, 2115Replacing the oil and filter in the VAZ 2108, 2109, 21099, 2 engine. 110Changing oil and filter in the VAZ 2113, 2114 engine , 2115, 2110Replacement of oil seals on valves of VAZ 2113, 2114, 2115Replacement of oil seals on valves of VAZ-2110, 2111Replacement of coolant on VAZ 2113, 2114, 2115Replacement of front crankshaft oil seal on VAZ 2113, 2114, 2 115Replacing the camshaft drive belt VAZ 2108-2115Replacing the oil seal camshaft VAZ 2113 2114, 2115 Replacement of the camshaft oil seal of VAZ-2110, 2111 engines Replacement of spark plugs VAZ 2113, 2114, 2115 Replacement of the fuel filter VAZ 2113, 2114, 2115 Carburetors VAZ 2108, 2109, 21099 , 2110Oil pump VAZ 2108-2115Coolant pump VAZ 2108- 2115 Coolant pump for the VAZ-21083, VAZ-2111 engine Run-in of the VAZ engine after repair Main dimensions of the VAZ 2108-2115 crankshaft Main dimensions of the VAZ connecting rod-piston group Cleaning of the VAZ crankcase ventilation system Selection of the piston for the VAZ cylinder Drive and adjustment of the timing belt tension of VAZ-21083 engines , VAZ-2111 Lapping valves of VAZ engines Grinding of valves of the VAZ-2111-2112 engine Checking the needle valve of the carburetor VAZ 2108-099, 2110 Checking the EPH system of VAZ 2108-099, 2110 cars Checking the technical condition of the VAZ cylinder block Checking the technical condition and repair of the VAZ cylinder head Checking the technical condition and repair of the crankshaft VAZChecking the technical condition of the distribution VAZ 2108-2115 shaft Checking the technical condition of the VAZ connecting rod-piston group Radiator and expansion tank VAZ 2108-2115 Dismantling VAZ 2111-2112 engines Disassembling and assembling the VAZ cylinder head Disassembling and assembling the VAZ 2113, 2114, 2115 engine Dismantling and assembling Connecting rod-piston howl of the VAZ groupDisassembling the VAZ 2110 carburetor with removal it from the engine Disassembling the removed carburetor VAZ 2108-099, 2110 Adjusting the tension of the camshaft drive belt VAZ 2108-2115 Adjusting the carburetor starting device VAZ 2108-099, 2110 Adjusting the idle system of carburetors VAZ 2108-099, 2110 Adjusting thermal clearances in engine valves VAZ-2110, 2111 Level adjustment carburetor fuel VAZ 2108-099, 2110Repair of VAZ oil pumpAssembly of VAZ 2111-2112 enginesCrankcase ventilation system of VAZ 2108-2115Engine exhaust system VAZ 2108-2115Exhaust system of VAZ-2111, 2112 enginesIgnition system of VAZ-2108 engines , 21081, 21083, 2110System cooling of VAZ-21083 and VAZ-2111 engines Power supply system for VAZ 2108, 21081, 21083 engines Lubrication system VAZ 2108-2115 Removing the gas receiver with fuel level sensor VAZ 2108, 2109, 21099 Removing the relay block, fuses and diagnostic connector VAZ 2108-2115 Removing control unit EPHH VAZ 2108- 099 School of intake and exhaust manifolds engine VAZ-21083 School of the engine of turning on the engine of engines VAZ-21083, VAZ-2111111111111111111-pressure lamp on the engine VAZ-2111, 2110 Summies of the insufficient oil level in the engine VAZ temperature sensor of the VAZ 2108-2115 Summer coolant temperature sensor fluids of VAZ-2111, 2110 engines Removing the VAZ 2113, 2114, 2115 engine Removing the additional muffler on VAZ-21083, 2110, 2111 engines Removing the rear mount of VAZ 2113, 2114, 2115 engines Removing the rear engine mount VAZ-2111, 2110 Removing and checking the engine thermostat VAZ-21083, VAZ-2111 Removing and checking the thermostat of the VAZ-2111 engine. Removing and checking the solenoid valve of VAZ 2108-099 carburetors. Removing and dismantling the cylinder head of VAZ 2113, 2114, 2115. Removing and dismantling the cylinder head of the VAZ-2111, 2110 engine. Removing and disassembling the ignition distributor sensor. VAZ 2108- 099, 2110 Removing and dismantling the oil pump VAZ 2113, 2114, 2115 Removing and dismantling the oil pump of the VAZ 2110, 2111, 2112 engine Removing and dismantling the fuel pump VAZ 2108, 2109, 21099 Removing and dismantling the fuel pump VAZ 21083, 2 110 (carburetor) Removal and installation of VAZ engine 2108-2115 Removing and installing the flywheel VAZ 2113, 2114, 2115 Removing the VAZ ignition system switch 2108-099 Removing the VAZ oil receiver Removing the coolant pump on VAZ-2111, 2110 engines Removing the neutralizer on VAZ-2111, 2112 engines Removing the main muffler on VAZ-2 engines 1083, 2110, 2111 Removing the front engine mounts VAZ 2113, 2114, 2115 Removing the VAZ oil pan Removing the throttle valve drive of the VAZ-2111 engine Removing the exhaust pipe of the VAZ-2112 engine Removing the exhaust pipe on VAZ-21083, 2110, 2111 engines Removing the radiator of VAZ-21083, VAZ-2111 engines main shaft of VAZ 2113 cars, 2114, 2115 Removing the camshaft of VAZ-2110, 2111 engines. Removing the receiver and collectors of the VAZ-2111 engine. Removing the fuel tank of VAZ 2108-2115 cars. Removing, troubleshooting and installing the VAZ flywheel. VAZ engine bridgeElectric fan for VAZ-21083 engines, VAZ-2111 Electronic Engine Management System VAZ engine knock sensor (ECM) VAZ engine oxygen sensor (ECM) VAZ engine mass air flow sensor (ECM) VAZ engine rough road sensor (ECM) VAZ throttle position sensor (ECM) VAZ engine crankshaft position sensor (ECM) (ECM) VAZ vehicle speed sensor (ECM) VAZ coolant temperature sensor (ECM) VAZ engine phase sensor (ECM) Diagnostic fault codes of the “January-4” controller Replacement of the VAZ air filter (ECM) Replacement of the air filter of VAZ-2111, 2112 engines Replacement регулятора холостого хода ВАЗ (ЭСУД)Замена свечей зажигания двигателя ВАЗ-2112Замена топливного фильтра двигателя ВАЗ-2111Клапан продувки адсорбера двигателя ВАЗ (ЭСУД)Контроллер системы впрыска двигателей ВАЗЛампа «CHECK ENGINE»Модуль зажигания двигателя ВАЗ (ЭСУД)Неисправности системы впрыска топлива ВАЗНеисправность системы холостого progress of the VAZ Interruptions in the operation of the VAZ engine (ECM) Procedure for relieving pressure in the VAZ 2108-2115 power supply system Checking the pressure in the fuel system of VAZ-2111, 2112 engines Checking the pressure in the fuel system of the VAZ-2111 engine Checking and adjusting the VAZ throttle drive cable (ECM) Checking the power system VAZ engine Checking injectors of VAZ-2111 engines Checking injectors of VAZ-2111, 2112 engines VAZ engine fuel pressure regulator (ECM) VAZ engine idle speed regulator (ECM) Repair of VAZ fuel pump (ECM) VAZ-2111, 2112 engine power supply system VAZ-2111 engine power supply system Control system VAZ-2111, 2112 engines Removing the adsorber of VAZ-2111, 2112 engines Removing the knock sensor of the VAZ-2111 engine Removing the oxygen sensor of the VAZ-2111 engine Removing the mass air flow sensor of the VAZ-2111 engine Removing the throttle position sensor of the VAZ-2111 engine Removing the crankshaft position sensor of the VAZ-2 engine 111 Removing the sensor speed - VAZ-2111 engine Removing the coolant temperature sensor of the VAZ-2111 engine Removing the throttle assembly of VAZ-2111 engines Removing the VAZ-2111 engine controller Removing the ignition module of the VAZ-2111 engine Removing the ignition module of the VAZ-2112 engine Removing the fuel pressure regulator of VAZ-2111 engines Removing the idle speed regulator of VAZ-2111 engines 2111 Removing the fuel rail of VAZ-2111 engines. Removing the fuel rail of VAZ-2111 engines. Removing the injectors of VAZ-2111, 2111 engines. Removing the engine injectors of VAZ-2111 engines. Removing the electric fuel pump with a fuel level sensor VAZ-2108-2115. M1.5.4N, “January-5.1”) VAZ fuel injectors VAZ engine injectors (ECM)Electronic engine control system VAZ-2111Electronic circuit diagram of the ECM of VAZ-2113-2115 carsBodySealing of the body of VAZ 2108-2115Replacement of the external door lock of VAZ 2108-2115 Body VAZ 2113-2114 Editing damaged body VAZ 2108-2115 Dismantling and assembling the front and rear doors of the VAZ 2108-2115 Removing the hood of the VAZ 2108-2115 Removing the (high) instrument panel 21083 Removing the (European) instrument panel 2113-2115 Removing the rear seat of the VAZ 2108-2115 Removing the door lock of the VAZ 2108 –2115 Removal and installation of VAZ bumpers 2113-2115 Removing the instrument cluster on a car with an instrument panel 21083 Removing the instrument cluster on a car with an instrument panel 2114 Removing the window lift mechanism VAZ 2108–2115 Removing the door trim VAZ 2108–2115 Removing the roof trim VAZ 2108-2115 Removing the front wing VAZ 2108-21 15Removing the front seat and slide VAZ 2108- 2115 Removing the shelf under the rear window of a VAZ 2108-2115 Removing the door glass of a VAZ 2108–2115 Removing, installing and adjusting the position of the trunk lid of a VAZ 2115 Preserving and protecting the paintwork of a VAZ Faults The car accelerates poorly VAZ Diagnosis of faults (Battery) VAZ Diagnosis of faults (Generator) VAZ Diagnostics of faults (Engine and its systems) VAZ 2108–2115 Fault diagnosis (Indicator lamps and instruments) VAZ 2108–2115 Fault diagnosis (Gearbox) VAZ Fault diagnosis (Lighting and light alarm) VAZ Fault diagnosis (Heating and ventilation system) VAZ 2108–2115 Fault diagnosis (Window wiper ) VAZ 2108 – 2115 Fault diagnosis ( Clutch) VAZDiagnostics of VAZ malfunctions (wheel drives, chassis, steering and braking system) Malfunctions of VAZ spark plugs Malfunctions of the VAZ fuel injection system Malfunctions of the VAZ idle system Interruptions in the operation of the VAZ engine (ECM) Problems with the VAZ brakesChecking the power supply system of the VAZ engineChecking electrical equipment of the VAZJerks during acceleration of the VA Jerks during steady VAZ movement Jerk at the moment the VAZ starts moving Knocks in the engine VAZ Heater Heating and ventilation system VAZ 2108–2115 Removing the heater fan VAZ 2108–2115 Removing and disassembling the heater VAZ 2108–2115 Removing the heater valve VAZ 2108–2115 Removing the heater radiator VAZ 2 108–2115AppendicesElectrical diagram of VAZ 2108-083 cars , VAZ 2109-099 Lamps used on the VAZ 2108–2115 car Basic data for adjustments and control of VAZ 2108–2170 Fuel, lubricants and operating fluids used VAZ 2108–2115 Connection diagram of the VAZ-2111 engine control system (controller M1.5.4) Connection diagram of the control system VAZ-2111 engine (controllers M1.5.4N, “January 5.1”) Electrical diagram of VAZ-21083, 93 and 099 cars (carburetor) Electrical diagram of VAZ-21099 cars with instrument panel 2114 (carburetor) Steering Replacement of VAZ steering rod Checking the gap between the stop racks and nuts VAZ 2108–2115, 2110Checking and adjusting the steering mechanism VAZ 2113, 2114, 2115Adjusting the angles of the front wheels VAZ 2113, 2114, 2115Steering gear VAZ 2108-2115Steering gear VAZ 2108–2115Steering gear VAZ 2108–2115 Removing and disassembling the steering mechanism of the VAZ 2108 -2115Removing the steering wheel and steering column VAZ 2108-2115, 2110Removing the steering rod and ends of the VAZ 2108-2115Tech. Service of the air filter of the VAZ (ESUD) Replacing the air filter VAZ 2113, 2114, 2115 Place of the rear brake pads VAZ 2113, 2114, 2115 Oil transmission in the gearbox of the VAZ 2113, 2114 gearbox, 2115 Oil and filter in the VAZ 2108, 2109, 2109, 2109, 2109, 2109, 2109, 2109, 2109, 2109. 21099, 2110Replacement of oil and filter in the engine of VAZ 2113, 2114, 2115, 2110Replacement of coolant of VAZ 2113, 2114, 2115Replacement of front brake pads of VAZ 2113, 2114, 2115Replacement of spark plugs of VAZ 2113, 2114, 2115Za Changing spark plugs for a VAZ-2112 engine Replacing a VAZ fuel filter 2113, 2114, 2115Maintenance of the VAZ 2113, 2114, 2115 batteryChecking and adjusting the steering mechanism of the VAZ 2113, 2114, 2115Checking and adjusting the VAZ throttle cable (ECM)Checking the operation of the VAZ vacuum brake boosterChecking the degree of wear of the brake pads, disc s and drums VAZChecking the parking brake VAZ Maintenance regulations VAZ 2113, 2114, 2115Adjusting the parking brake VAZ 2113, 2114, 2115Adjusting the clutch cable VAZ 2113, 2114, 2115Adjusting the angles of the front wheels VAZ 2113, 2114, 2115Removing and installing the VAZ parking brake system Brake systemVacuum booster VAZReplacement of the rear wheel cylinder of VAZReplacement of the rear ones VAZ brake padsReplacing the rear brake pads of VAZ 2113, 2114, 2115Replacing the front brake pads of VAZReplacing the front brake pads of VAZ 2113, 2114, 2115Problems with VAZ brakesChecking and adjusting the pressure regulator drive of the rear brakes of VAZChecking the functionality of the VAZ vacuum boosterChecking the operation of the vacuum brake booster VAZChecking the degree of wear of brake pads, VAZ discs and drumsChecking the VAZ parking brakeBleeding the VAZ brakesDisassembling and assembling the VAZ 2108–2115 master cylinderDisassembling and assembling the VAZ rear wheel cylinderDisassembling and assembling the VAZ caliperDisassembling, checking parts and assembling the VAZ brake pressure regulatorAdjusting the VAZ 2108–2115 brake driveAdjusting the VAZ parking brake 2113, 2114, 2115 Regulator rear brake pressure VAZ Removing the vacuum booster and brake pedal assembly VAZ Removing the master brake cylinder VAZ Removing parts of the front wheel brake mechanism VAZ Removing parts of the front wheel brake VAZ Removing the rear brake hose VAZ Removing and adjusting the parking brake system VAZ Removing the front brake hose VAZ Removing the pressure regulator of the rear brakes VAZ Removing the lever, extension and bracket VAZ Brake system VAZ Rear wheel brake VAZ Transmission Rear suspension VAZ 2108-2115 Rear suspension VAZ 2108-2115 Replacement of the (release) bearing for the VAZ clutch release Replacement of the shock absorber and spring of the rear suspension of VAZ Replacement of the driven disk and clutch housing on VAZ-2108 engines 3, 2110, 2111, 2112Replacement of slave and master clutch discs VAZReplacing the clutch release fork VAZReplacing the bushings of the gear shift lever axis VAZReplacing the protective cap of the ball joint VAZReplacing the oil in the VAZ gearboxReplacing the oil in the VAZ gearboxReplacing the clutch release bearing VAZReplacing the front hub bearing VAZ 2108-2115Replacing the hub bearing VAZ 2108-211 5, 2110 Replacement of rear wheel bearing VAZ suspension Replacement of the VAZ front suspension hub bearing Replacement of silent blocks of the VAZ 2108-2115 rear suspension beam Replacement of gearbox seals on VAZ-21083, 2110, 2111, 2112 engines Gearbox engine VAZ-21083, 2111, 2110, 2112 Determination of the technical condition of front suspension parts VAZ 2108- 2115Front suspension VAZ 2108-2115Selection of the adjusting ring for differential bearings VAZ 2108-2115Lifting the rear of the VAZFront wheel drives of the VAZ family (CV joints)Disassembly and assembly of the rear strut VAZ 2108-2115Disassembly and assembly of the gearbox on engines VAZ-21083, 2110, 2111, 2112Adjusting the clutch cable VAZ 2113, 2114, 2115Repair of secondary shaft of VAZ gearboxRepair of VAZ differentialRepair of VAZ gear selection mechanismRepair of VAZ gear shift leverRepair of VAZ gearbox synchronizerRepair of VAZ clutchRemoval of shock absorber and rear suspension spring of VAZ 2108-2115Removal of VAZ rear suspension beamRemoval and disassembly of internal joint (CV joint) C) VAZ Removing and adjusting the clutch cable VAZ Removing and installing the VAZ clutch Removing the gearbox on VAZ-21083, 2110, 2111, 2112 engines Removing the VAZ clutch release drive mechanisms Removing the external joint (CV joint) of the VAZ family Removing the front pillar and disassembling VAZ 2108-2115, 2110 Removing the gear shift drive on VAZ-21083 engines 2110 . OperationCar anti-theft system APS-4 VAZ 2113, 2114, 2115 External mirror control unit VAZ 2113, 2114, 2115 On-board control system VAZ 2113, 2114, 2115 Overall dimensions (reference) of the VAZ 2114, 2115 vehicle Identification numbers (VIN) of VAZ 2113, 2114, 21 vehicles 15Keys to cars VAZ 2113, 2114, 2115 Instrument cluster VAZ 2113, 2114, 2115 Trip computer VAZ 2113, 2114, 2115 Controls - instrument panels VAZ 2113, 2114, 2115 Controls VAZ 2113, 2114, 2115 Steering column switches VAZ 2113, 2114 , 2115Preservation and protection of VAZ paintwork Technical characteristics of VAZ 2113, 2114 cars , 2115 Complex for the engine vasid for the VAZElectro-equipment controller control unit of external mirrors VAZ 2113, 2114, 2115 Border control system VAZ 2113, 2114, 2115 Lasgenerator Vasgenerator VAZ 2108-2115 HIGHT CHARTOR OF FAITHER of the VAZMENA switches of the contact group of the contact group of the contact group of the contact group of the contact group of the contact group of the contact group Muppet battery of vazza signal vascobination of VAZ devices 2113, 2114, 2115 MARSHRUAL computer VAZ 2113, 2114, 2115 MOTH OF VASSOBRUGE LIGHTION, LAMS STOP-signal and reverse, lighting of the cabin and trunk VAZ 2108-2115 VAZ 2113, 2114, 2115 Plain and Winter Winter Waster Waster and Waster Waster Waster Waster Waster La door of the hide VAZ-2108-09,-2113-14 checking the indication unit of the on-board control system VAZ 2108-2115 VAZ generator VAZ 2108-2115 checks of sensors of control devices of the vaz test and replacing the voltage regulator with the brush holder on the generator 5102.3711 control of the control devices and their sensors VAZ 2108-2115- accumulation of accumulative Batteries of the vasver of electrical equipment of the starter Vas Discharging 29.3708 Diating the starter 5712.3708 Diabage, assembly and checking of the engine-cleaner of the vasmont of the Generator Starter 211.3708010 2108-2115 School of the sensor of the control lamp of the oil on the engine VAZ-2111, 2110 insufficient oil level in the engine vas in the rear flashlight, replacing the VAZ 2108-2115 Lamps and disassembly of the generator 37.3701 Subject and disassembly of the generator 9402.3701 Cleaning and disassembly of the windshield of the VAZ 2108-2115 Combinations of the device with the instrument panel 21083 car with instrument panel 2114 Motor reducer of the door Zake VAZ-2108-09,-2113-14 School of front ceiling lighting VAZING VAZ VAZ VAZ 2108-2115 School of the Starter VAZ 2108-2115 SCRICTION VAZ 2108-2108-2115 Claring VAZ sites 2108-2115 Control of engines 2111 and 2112 (Cont. M1.5.4n, “January-5.1”) the turning of the VAZ 2108-2115Fara VAZ 2108-2115EELEKTROPROPRIPS VAZ 2108-2115EELEKTROSTROSTROSTROSTRICS VAZELEKTROSUD EXECUM VAZ-2113-2115TYUNIONINGZAPAPARY VAZ 2108-2115 LOVE OF TAZ Ninga VAZ 2108– 2115 (soft exhaust) Recommendations for tuning VAZ 2108–2115 (reinforced stretch brackets) Recommendations for tuning VAZ 2108–2115 (installation of a composite pulley pulley pulley)

….

VAZ 2114 engine repair

During the operation of the internal combustion engine on a car, various failures and malfunctions may occur, which can be eliminated by self-repair or with the involvement of specialists. The need for a major overhaul of the power propulsion system, with its proper operation, arises when the mileage reaches 150,000 km. In this case, a VAZ 2114 engine overhaul is needed.

1. Before you begin disassembling the engine, you need to drain the oil and coolant, and then wash the entire unit. Be sure to remove all attachments so as not to damage them during reassembly.
2. Disconnect all pipes through which gasoline is supplied.
3. Remove all systems and components related to the air supply, remove the air supply and exhaust hoses and pipes.
4. Remove the cooling system pipes and crankcase breather. Don't forget to disconnect the throttle pipe.
5. Remove the receiver, as well as the pipeline mounting bracket and the fuel rail, remove the injectors with regulators.
6. Remove the wires with the ignition module and knock sensor. Unscrew the spark plugs. After this, unscrew all sensors.
7. Remove the generator by first removing the tension belt. With the generator, remove all brackets and strips necessary for its installation and adjustment.
8. Block the flywheel and remove the generator pulley.
9. Remove the camshaft drive with the cover, tension mechanism and pulley.
10. Unscrew the pump, remove the exhaust manifold and thermostat.
11. Disconnect the oil filter and oil sump, then remove the oil pump.
12. In order to remove the piston group, you need to unscrew the nuts from the connecting rod bolts and remove the cover.
13. Since the flywheel is blocked, you need to unscrew its fastenings with the flange and remove the flywheel disk.
14. Remove the caps from the main bearings along with the lower bearings.
15. Carefully pull out the crankshaft. It must be handled very carefully to prevent damage and scratches.
16. Remove the upper liners and thrust half-rings.

When overhauling an internal combustion engine, it is necessary to carefully inspect each unit, component or part. If mechanical damage is detected, the spare part must be replaced. All gaskets, washers and non-metallic parts also need to be replaced.

The VAZ 2114 injector engine is a series of engines that were installed on the Lada 2114 vehicle. Like many Lada models, the 2114 model received several power unit options over all years of production. So, the technical characteristics of each of them were different. Let's consider the design of the 2114 engine, as well as issues of maintenance, tuning and repair.