Location of the element in the car structure
To quickly and correctly install a new belt, you need to have a diagram of how this spare part should go around the rollers and pulleys. A detailed image can be found in the vehicle's operating instructions. Owners of a car of this brand are recommended to always have with them not only a spare part, but also a visual explanation.
A new spare part is installed using the same scheme. In this case, you must first wrap the belt around all the rollers and only at the last stage put it on the generator.
Drive belts UAZ engine 409 installation
For some reason I couldn’t find a topic about belts where all the information would be collected in one place. Everything is somehow scattered, owners of cars of different years of manufacture unsubscribe, resulting in confusion. I suggest making a FaQ on the belts and securing it.
So. Everything I dug up in different topics. If you have anything to add/change, write.
Accessory drive belt (pump, generator) - 6РК1220 Power steering belt - 1210. Is 1220 also suitable? Tensioner roller 406-1308080, 1 piece.
These, as I understand it, are cars with a ZF steering wheel and a steering gearbox inside the frame? (right/wrong - correct) Did these cars have air conditioning? If so, what kind of belts are there?
I didn’t find a photo with the gur belt, but it’s quite clear where it goes
How to choose the right drive belt
First of all, you need to decide on the required length. Starting from 2012, when the Patriot was equipped with a Euro 4 engine, a model with a length of 2120 mm was used.
On cars manufactured between 2007 and 2012, a belt with a length of 2100 mm was initially installed. When replacing a failed spare part, it is permissible to choose a longer length. Experienced car enthusiasts claim that in this case the installation process will be much simpler. However, one may come across the opinion that a longer component part will begin to “whistle” much earlier.
Also in models released between 2007 and 2012. You can find engines that have 2 belts installed. In this case, depending on the modification, components with the number are used:
Therefore, before buying a new belt, you need to open the hood or technical documentation for the car in order to find out which engine version is installed
To ensure that the belt does not crumble and lasts a long time, it must be made of EPDM. This is a generalized international name for materials manufactured using ethylene-propylene rubbers. This spare part is resistant to aging and temperature changes. Therefore, it is most often recommended to give preference to products from European or Asian manufacturers.
Manufacturers of spare parts
As a replacement for the original belt installed at the factory, any analogue that matches in length and width can be used for a UAZ Patriot. Such products can be found from companies:
- SKF;
- Gates;
- Globelt;
- Bosch;
- TANAKI Co. Ltd;
- LYNXauto.
Poly V-belts of this configuration are used in car engines of such brands as Ford, Lexus, Opel, etc. Therefore, choosing a quality spare part is quite simple.
Experienced auto mechanics do not recommend purchasing components produced by companies such as Luzar or Zommer, despite their lower cost.
Source
How to choose a drive belt for an engine with air conditioning
> Questions and answers
16.12.2019
To select a belt for a UAZ Patriot 409 engine generator with air conditioning, you need to know the features of your car model. Cars of this brand may have 1 or 2 such components. The main parameter by which you need to select a new spare part is length.
Manufacturers of spare parts
As a replacement for the original belt installed at the factory, any analogue that matches in length and width can be used for a UAZ Patriot. Such products can be found from companies:
- SKF;
- Gates;
- Globelt;
- Bosch;
- TANAKI Co. Ltd;
- LYNXauto.
Poly V-belts of this configuration are used in car engines of such brands as Ford, Lexus, Opel, etc. Therefore, choosing a quality spare part is quite simple.
Experienced auto mechanics do not recommend purchasing components produced by companies such as Luzar or Zommer, despite their lower cost.
How to choose a drive belt for an engine with air conditioning Link to main publication
Source: https://MyUazPatriot.ru/voprosy-i-otvety/kak-podobrat-privodnoj-remen-na-dvigatel-s-konditsionerom
How to choose an accessory belt for UAZ Patriot
On the one hand, selecting and replacing belts for UAZ Patriot units is a very problematic undertaking, which is easier to implement at a service station with a wide range of spare parts. On the other hand, not everyone will agree to shell out 3 times more money than the consumables themselves cost for work that can be done independently in a garage in literally an hour.
The first thing you need to remember when selecting machine belts is that rubber products have a high stretch coefficient (up to 1-3%), so there is no rigid and precise concept of size accurate to the millimeter, and the design of the power plant necessarily provides for tension adjustment. The concept of dimension for belts is nominal, i.e. in one batch there may be products with significant deviations in length. For example, a belt with a nominal size of 1000 mm can be from 995 to 1005 mm - this is a deviation of only +- 0.5%.
It is for this reason that it is quite possible to install, for example, a belt with a nominal value of 1000 mm and a belt with a nominal value of 1010 mm on the same unit.
Still, it is worth sticking to the nominal sizes and definitely when selecting a belt you need to know it exactly.
Selection of belt for UAZ Patriot units
The drive belt for any car is a vital consumable component, so it is recommended not only to carry out regular inspections, but to change it somewhat earlier than its working life.
Separately, it is worth noting that due to the very large difference in the quality of UAZ Patriot engine spare parts from different manufacturers, it is recommended to have in stock (even carry with you) a new belt of suitable size.
A similar fate does not escape the UAZ Patriot, and it is good if you initially accurately and clearly know the features of the power unit of your car and what belts are installed in it. A more difficult case is when the dimensions on the belts have become worn out over time, and finding parameters in the operating instructions is also not an easy task.
How to choose an accessory belt for UAZ Patriot
On the one hand, selecting and replacing belts for UAZ Patriot units is a very problematic undertaking, which is easier to implement at a service station with a wide range of spare parts. On the other hand, not everyone will agree to shell out 3 times more money than the consumables themselves cost for work that can be done independently in a garage in literally an hour.
The first thing you need to remember when selecting machine belts is that rubber products have a high stretch coefficient (up to 1-3%), so there is no rigid and precise concept of size accurate to the millimeter, and the design of the power plant necessarily provides for tension adjustment. The concept of dimension for belts is nominal, i.e. in one batch there may be products with significant deviations in length. For example, a belt with a nominal size of 1000 mm can be from 995 to 1005 mm - this is a deviation of only +- 0.5%.
It is for this reason that it is quite possible to install, for example, a belt with a nominal value of 1000 mm and a belt with a nominal value of 1010 mm on the same unit.
Still, it is worth sticking to the nominal sizes and definitely when selecting a belt you need to know it exactly.
We select the accessory belt for UAZ Patriot according to the car model
The evolution of the UAZ Patriot shows that different models use belts with large differences in dimensions. To understand what's under the hood you need to know at least a few parameters of the car:
- What environmental safety class did the engine originally belong to - from Euro 0 to Euro 5.
- Engine model or marking. We will consider the UAZ Patriot ZMZ 409 engine family.
- Year of manufacture of the vehicle. Not the year of purchase.
- Presence or absence of air conditioning.
Knowing these four parameters, it is quite possible to determine the size of the belt of UAZ Patriot units:
Until 2007, the 409 UAZ Patriot engine was produced with EURO class 0-2 and did not structurally change in the unit that interests us. Such a power unit has 2 identical belts: for power steering and for driving the pump and generator. The selection is extremely simple in this case and you can safely buy two belts:
From 2007 to 2012, the ZMZ 409 engine received a new EURO 3 standard, so the power plant changed slightly and received two options:
Without air conditioning, where the 6PK1275 accessory drive belt is installed.
With air conditioning, where the 6РК2100 unit drive belt is installed.
Separately, it is worth noting that the 6PK1220 belt is used for power steering.
The evolution of the ZMZ 409 did not stop there, and from 2012 to 2021 the engine received the new EURO 4 standard with some changes.
Models with air conditioning are equipped with 6РК2100 or 6РК2120 belts, because There is a fairly wide tension adjustment.
Alternator belt size UAZ Patriot 409 engine without air conditioning 2021
| Page 1 of 2 | 1 | 2 | > |
For some reason I couldn’t find a topic about belts where all the information would be collected in one place. Everything is somehow scattered, owners of cars of different years of manufacture unsubscribe, resulting in confusion. I suggest making a FaQ on the belts and securing it.
So. Everything I dug up in different topics. If you have anything to add/change, write.
Accessory drive belt (pump, generator) - 6РК1220 Power steering belt - 1210. Is 1220 also suitable? Tensioner roller 406-1308080, 1 piece.
These, as I understand it, are cars with a ZF steering wheel and a steering gearbox inside the frame? (right/wrong - correct) Did these cars have air conditioning? If so, what kind of belts are there?
I didn’t find a photo with the gur belt, but it’s quite clear where it goes
Accessory drive belt - 6РК1275 Roller 4052-1308080 on automatic tensioner 40624.1029010 - 1 piece. Power steering belt - 6РК1235
This is the only picture for now, if I find a better one I’ll post it
One drive belt, 6РК2100 Rollers 4052-1308080 on automatic tensioner 40624.1029010 - 1 piece 406-1308080 - 2 pieces
One drive belt, 6РК2120 (what caused the change?) Rollers 4052-1308080 on automatic tensioner 40624.1029010 ] - 1 piece 406-1308080 - 2 pieces
ZMZ-514, Euro-2, year of manufacture. — .
Power steering: Power steering drive belt 6RK923 Guide roller 514.3407070
Unit drive belt 6РК1220 Roller 514.1308080
Injection pump: Injection pump drive belt: Toothed 1360, 136 teeth. Tensioner roller, assembled with bracket 514.1111071 Belt tensioner rollers, on bar 514-1111067-10
Power steering belt (without air conditioning) - 6РК1395 There is also information that without power steering the belt costs 1235. What does it depend on?
Power steering belt and air conditioner — 6РК1693 Rollers 2112-1006120 — 2 pcs.
Belt of units (kv-fuel pump-generator-pump) - 6РК1600 Rollers: 4052-1308080, on automatic tensioner 40624.1029010 1 pc. Support belt roller (located between the generator and the pump) 3413-1006135 1 piece.
Accessory drive belt (pump, generator) - 6РК1220 Power steering belt - 1210. Is 1220 also suitable? Tensioner roller 406-1308080, 1 piece.
Accessory drive belt 6РК1275 Power steering drive belt 6РК1195 Tension roller 406-1308080, 1 piece.
Power steering: Power steering drive belt 6RK923 Guide roller 514.3407070
Unit drive belt 6РК1220 Roller 514.1308080
Injection pump: Injection pump drive belt: Toothed 1360, 136 teeth. Roller Tensioner roller, assembled with bracket 514.1111071 Belt tensioner rollers, on bar 514-1111067-10
Source
